Safe slot nut guard. StewMac Safe Slot Nut Guard, Complete Set | eBay

Cut the rough slots with an xacto saw.

Who owns golden nugget casino in lake charles la

Contact the seller- opens in a new window or tab and request shipping safe slot nut guard your location. I use a radius gauge, but you could get away with marking the thickness of each string above your minimum height line and connecting the dots. Wound strings are thicker, so they need more space than thinner treble strings. My method of marking the rough nut is similar to moosie's, though I did start using the StewMac tool.

Determine the fret height, add about thousandths, and make a stack of feeler gauges to match. Glue in the nut String up the guitar Get final nut setup done by holding the string safe slot nut guard the 3rd fret, etc. Select a valid country. When the slotting saw touches the feeler gauges, you've hit your depth.

Shop with confidence

Slack strings don't make good straight edges. If I'm feeling very confident at this step, I'll do the final shaping and polishing now too. Stack feeler gauges against the nut to set your slot depth. They have to be close to pitch or they'll be off, and you'll wind up filing too far and having to start over.

Estimated sales tax Seller charges sales tax for items shipped to: This set includes tapered wedges for both electric and acoustic guitars to mark out your trim line and a slim version of our String Spacing Rule to show where to put your string slots. United States No additional safe slot nut guard charges at delivery!

The Safe Slot Nut Guard holds the feeler gauges tightly against the nut, and curved to the radius of your fingerboard. I also rarely buy wooden pencils.

Slot pasion

This leaves both hands free for filing. Please enter 5 or 9 numbers for the ZIP Code. The G string is a pain unless you have a string tree behind it. It looks neater and is easier to cut the slot, but a deep slot won't cause binding of the string. Mark the rough height for the top of the nut. Reinstall the nut, and mark the slot locations. It may cause binding of your file.

Please enter a number less than or equal to 5. I make it about. I tried cutting a pencil in half to mark the fret height on the nut, but I couldn't keep from breaking the tip off so it was about useless. To get the slots filed precisely to the right depth, I use the method of fretting at the 3rd safe slot nut guard and looking for clearance between the string and the 1st fret.

This item will be shipped through the Global Shipping Program and includes international tracking. Replace the rule with your feeler gauges and you're ready to cut nut slots. Somewhere along the line someone decided that a string slot would cause binding if it was too deep. Finish shaping and polishing the nut if need be.

Texas holdem outs calculator

Finish the slots with gauged files, still going most of the way to the minimum cut line. Holds multiple feeler gauges Pulls gauges tight to match fretboard radius Locks in place against the nut. There are 5 items available. This is as low as you want to file. Be careful to get the highest point of the slot at the front of the nut so the string breaks cleanly at the right spot.

In fact, every string space needs to be a little different to feel right in the player's hand.

Potencia black jack

No measuring, dividing or calculating. Perfect string spacing without math — For good playing feel, don't use equal spaces between the strings. A trick the pros use: Shipping and handling The seller has not specified a shipping method to Germany. Learn more- opens in a new window or tab Quantity: